virtual_knitting_machine.machine_components package

This package provides each of the classes that represent components of the knitting machine.

Subpackages

• virtual_knitting_machine.machine_components.carriage_system package
  • Submodules
    • virtual_knitting_machine.machine_components.carriage_system.Carriage module
      • Carriage_State
      • Carriage
    • virtual_knitting_machine.machine_components.carriage_system.Carriage_Pass_Direction module
      • Carriage_Pass_Direction
    • virtual_knitting_machine.machine_components.carriage_system.Carriage_Snapshot module
      • Carriage_Snapshot
• virtual_knitting_machine.machine_components.needles package
  • Submodules
    • virtual_knitting_machine.machine_components.needles.Needle module
      • Needle_Specification
      • Needle_Position
      • Needle
    • virtual_knitting_machine.machine_components.needles.Sheet_Identifier module
      • Sheet_Identifier
    • virtual_knitting_machine.machine_components.needles.Slider_Needle module
      • Slider_Needle
    • virtual_knitting_machine.machine_components.needles.slotted_position_protocol module
      • Slotted_Position
• virtual_knitting_machine.machine_components.yarn_management package
  • Submodules
    • virtual_knitting_machine.machine_components.yarn_management.Yarn_Carrier module
      • Yarn_Carrier_State
      • Yarn_Carrier
    • virtual_knitting_machine.machine_components.yarn_management.Yarn_Carrier_Set module
      • Yarn_Carrier_Set
    • virtual_knitting_machine.machine_components.yarn_management.Yarn_Carrier_Snapshot module
      • Yarn_Carrier_Snapshot
    • virtual_knitting_machine.machine_components.yarn_management.Yarn_Insertion_System module
      • Yarn_Insertion_System_State
      • Yarn_Insertion_System
    • virtual_knitting_machine.machine_components.yarn_management.Yarn_Insertion_System_Snapshot module
      • Yarn_Insertion_System_Snapshot

Submodules

• virtual_knitting_machine.machine_components.Needle_Bed module
  • Needle_Bed_State
    • Needle_Bed_State.knitting_machine
    • Needle_Bed_State.violation_policy
    • Needle_Bed_State.is_front
    • Needle_Bed_State.needles
    • Needle_Bed_State.sliders
    • Needle_Bed_State.is_back
    • Needle_Bed_State.needle_count
    • Needle_Bed_State.loop_holding_needles
    • Needle_Bed_State.loop_holding_sliders
    • Needle_Bed_State.active_loops
    • Needle_Bed_State.active_slider_loops
    • Needle_Bed_State.active_needle_count
    • Needle_Bed_State.active_slider_count
    • Needle_Bed_State.sliders_are_clear
    • Needle_Bed_State.loop_is_active()
    • Needle_Bed_State.loop_on_slider()
    • Needle_Bed_State.loop_on_needle()
    • Needle_Bed_State.get_needle_of_loop()
    • Needle_Bed_State.slider_is_active()
    • Needle_Bed_State.needle_is_active()
    • Needle_Bed_State.__len__()
    • Needle_Bed_State.__iter__()
    • Needle_Bed_State.__contains__()
    • Needle_Bed_State.__getitem__()
    • Needle_Bed_State.__class_getitem__()
    • Needle_Bed_State.__init__()
    • Needle_Bed_State.handle_violations()
    • Needle_Bed_State.set_response_for()
  • Needle_Bed
    • Needle_Bed.__init__()
    • Needle_Bed.knitting_machine
    • Needle_Bed.is_front
    • Needle_Bed.needles
    • Needle_Bed.sliders
    • Needle_Bed.__class_getitem__()
    • Needle_Bed.__contains__()
    • Needle_Bed.__getitem__()
    • Needle_Bed.__iter__()
    • Needle_Bed.__len__()
    • Needle_Bed.active_loops
    • Needle_Bed.active_needle_count
    • Needle_Bed.active_slider_count
    • Needle_Bed.active_slider_loops
    • Needle_Bed.get_needle_of_loop()
    • Needle_Bed.handle_violations()
    • Needle_Bed.is_back
    • Needle_Bed.loop_holding_needles
    • Needle_Bed.loop_holding_sliders
    • Needle_Bed.loop_is_active()
    • Needle_Bed.loop_on_needle()
    • Needle_Bed.loop_on_slider()
    • Needle_Bed.needle_count
    • Needle_Bed.needle_is_active()
    • Needle_Bed.set_response_for()
    • Needle_Bed.slider_is_active()
    • Needle_Bed.sliders_are_clear
    • Needle_Bed.violation_policy
    • Needle_Bed.add_loops()
    • Needle_Bed.drop()
• virtual_knitting_machine.machine_components.Needle_Bed_Snapshot module
  • Needle_Bed_Snapshot
    • Needle_Bed_Snapshot.__init__()
    • Needle_Bed_Snapshot.knitting_machine
    • Needle_Bed_Snapshot.is_front
    • Needle_Bed_Snapshot.needles
    • Needle_Bed_Snapshot.sliders
    • Needle_Bed_Snapshot.loop_holding_needles
    • Needle_Bed_Snapshot.loop_holding_sliders
    • Needle_Bed_Snapshot.get_needle_of_loop()
    • Needle_Bed_Snapshot.slider_is_active()
    • Needle_Bed_Snapshot.needle_is_active()
    • Needle_Bed_Snapshot.__contains__()
    • Needle_Bed_Snapshot.__class_getitem__()
    • Needle_Bed_Snapshot.__iter__()
    • Needle_Bed_Snapshot.__len__()
    • Needle_Bed_Snapshot.active_loops
    • Needle_Bed_Snapshot.active_needle_count
    • Needle_Bed_Snapshot.active_slider_count
    • Needle_Bed_Snapshot.active_slider_loops
    • Needle_Bed_Snapshot.handle_violations()
    • Needle_Bed_Snapshot.is_back
    • Needle_Bed_Snapshot.loop_is_active()
    • Needle_Bed_Snapshot.loop_on_needle()
    • Needle_Bed_Snapshot.loop_on_slider()
    • Needle_Bed_Snapshot.needle_count
    • Needle_Bed_Snapshot.set_response_for()
    • Needle_Bed_Snapshot.sliders_are_clear
    • Needle_Bed_Snapshot.violation_policy
    • Needle_Bed_Snapshot.__getitem__()
• virtual_knitting_machine.machine_components.Side_of_Needle_Bed module
  • Side_of_Needle_Bed
    • Side_of_Needle_Bed.Left_Side
    • Side_of_Needle_Bed.Right_Side
    • Side_of_Needle_Bed.opposite
    • Side_of_Needle_Bed.slot()
    • Side_of_Needle_Bed.__neg__()
    • Side_of_Needle_Bed.__invert__()
    • Side_of_Needle_Bed.__str__()
    • Side_of_Needle_Bed.__repr__()
    • Side_of_Needle_Bed.__lt__()
    • Side_of_Needle_Bed.__contains__()
    • Side_of_Needle_Bed.__getitem__()
    • Side_of_Needle_Bed.__iter__()
    • Side_of_Needle_Bed.__len__()
• virtual_knitting_machine.machine_components.machine_component_protocol module
  • Machine_Component
    • Machine_Component.knitting_machine
    • Machine_Component.violation_policy
    • Machine_Component.machine_specification
    • Machine_Component.machine_racking
    • Machine_Component.machine_is_all_needle_racked
    • Machine_Component.needle_count_of_machine
    • Machine_Component.rightmost_slot_on_machine
    • Machine_Component.__class_getitem__()
    • Machine_Component.__init__()
    • Machine_Component.handle_violations()
    • Machine_Component.set_response_for()
• virtual_knitting_machine.machine_components.needle_bed_position module
  • Needle_Bed_Position
    • Needle_Bed_Position.__init__()
    • Needle_Bed_Position.knitting_machine
    • Needle_Bed_Position.position_on_bed
    • Needle_Bed_Position.current_bed_side
    • Needle_Bed_Position.parking_position
    • Needle_Bed_Position.parked_slot
    • Needle_Bed_Position.parked_direction
    • Needle_Bed_Position.needle
    • Needle_Bed_Position.slot_number
    • Needle_Bed_Position.last_direction
    • Needle_Bed_Position.reverse_of_last_direction
    • Needle_Bed_Position.on_bed
    • Needle_Bed_Position.between_needles
    • Needle_Bed_Position.conflicting_needle_slot
    • Needle_Bed_Position.slot_range
    • Needle_Bed_Position.take_off_bed()
    • Needle_Bed_Position.set_position()
    • Needle_Bed_Position.update_from_position()
    • Needle_Bed_Position.__eq__()
    • Needle_Bed_Position.__lt__()
    • Needle_Bed_Position.__class_getitem__()
    • Needle_Bed_Position.__int__()
    • Needle_Bed_Position.aligned_with_slot()
    • Needle_Bed_Position.direction_to_slot()
    • Needle_Bed_Position.handle_violations()
    • Needle_Bed_Position.in_pass_direction()
    • Needle_Bed_Position.left_of_slot()
    • Needle_Bed_Position.machine_is_all_needle_racked
    • Needle_Bed_Position.machine_racking
    • Needle_Bed_Position.machine_specification
    • Needle_Bed_Position.needle_count_of_machine
    • Needle_Bed_Position.right_of_slot()
    • Needle_Bed_Position.rightmost_slot_on_machine
    • Needle_Bed_Position.set_response_for()
    • Needle_Bed_Position.violation_policy
  • Relative_to_Needle_Bed
    • Relative_to_Needle_Bed.position_on_bed
    • Relative_to_Needle_Bed.slot_number
    • Relative_to_Needle_Bed.last_direction
    • Relative_to_Needle_Bed.__class_getitem__()
    • Relative_to_Needle_Bed.__init__()
    • Relative_to_Needle_Bed.__int__()
    • Relative_to_Needle_Bed.aligned_with_slot()
    • Relative_to_Needle_Bed.direction_to_slot()
    • Relative_to_Needle_Bed.handle_violations()
    • Relative_to_Needle_Bed.in_pass_direction()
    • Relative_to_Needle_Bed.knitting_machine
    • Relative_to_Needle_Bed.left_of_slot()
    • Relative_to_Needle_Bed.machine_is_all_needle_racked
    • Relative_to_Needle_Bed.machine_racking
    • Relative_to_Needle_Bed.machine_specification
    • Relative_to_Needle_Bed.needle_count_of_machine
    • Relative_to_Needle_Bed.right_of_slot()
    • Relative_to_Needle_Bed.rightmost_slot_on_machine
    • Relative_to_Needle_Bed.set_response_for()
    • Relative_to_Needle_Bed.violation_policy